Board index   FAQ   Search  
Register  Login
Board index VRRA Racing Forum Projects
Print view

MidProd 500 Single

NEW! This section is where we can show off our new bike projects!

Moderator: Michael Vinten

Post a reply

MidProd 500 Single

Postby BrianL » Sat Oct 20, 2012 12:17 pm

Not much to report yet but thought I'd show everybody my jumping off point... A really ugly start to what will be the place I've wanted to be in the VRRA ever since meeting Link Metcalf. I've done the 4 cylinder and two cylinder thing, but a single is the way to go for me. I had an incredible race with Steve Bond back in 09' at Mosport while he showed me what racing was on his SR500 and between Link's advice and Bondo's performance, I was hooked! So here goes...
We don't stop ridding cause we get older,
We get older cause we stop ridding...
Special thanks to St-Hubert Machine Shop and Built by Bill
User avatar
BrianL
VRRA Member
 
Posts: 1063
Joined: Tue Mar 11, 2008 10:08 pm
Location: Brossard, Qc
Top

Re: MidProd 500 Single

Postby TimV » Sat Oct 20, 2012 6:07 pm

That is one ugly mother of a bike Brian! LOL!

Can't wait to see the progress you make with it.

Tim
Tim Voyer #840

CMR Suzuki TR750 Replica
CMR-Seeley 350 Replica
1971 P1 CB350

Whatever you do, always give 100%. Unless you're donating blood.
User avatar
TimV
VRRA Member
 
Posts: 1114
Joined: Wed Jul 20, 2005 10:12 pm
Location: Northern Ontario
Top

Re: MidProd 500 Single

Postby BrianL » Wed Oct 24, 2012 4:25 pm

Thanks Tim. I'm on nights right now, but I'll be posting new pics next week. I've started the tear down and it's only getting uglier as I go along!!!!! :lol: :shock:
We don't stop ridding cause we get older,
We get older cause we stop ridding...
Special thanks to St-Hubert Machine Shop and Built by Bill
User avatar
BrianL
VRRA Member
 
Posts: 1063
Joined: Tue Mar 11, 2008 10:08 pm
Location: Brossard, Qc
Top

Re: MidProd 500 Single

Postby Bondo » Sat Oct 27, 2012 11:53 am

Hey Brian - I remember our dice at Mosport quite well. The P3 race went well and I even managed to win the middleweight production heat on the SR500. The final didn't go so well.....


I've got a couple of single walled header pipes for the SR if you're interested. You can't really make those things very fast but every little bit helps and the header is one easy thing to do.

E-mail me and we'll work it out. All you have to do is arrange pickup or shipping. They're not doing anyone any good sitting in my garage.

I think I even have a header that tucks up high in case you want to run a high pipe.

scugog8 at yahoo dot com
I never finish anyth
User avatar
Bondo
VRRA Member
 
Posts: 1001
Joined: Thu Feb 06, 2003 8:47 am
Location: Oshawa, Ontario
Top

Re: MidProd 500 Single

Postby BrianL » Tue Oct 30, 2012 2:27 pm

Thanks a million Steve!!!! I'll email you with ideas and details...Thanks again!!!! :D :D :D
We don't stop ridding cause we get older,
We get older cause we stop ridding...
Special thanks to St-Hubert Machine Shop and Built by Bill
User avatar
BrianL
VRRA Member
 
Posts: 1063
Joined: Tue Mar 11, 2008 10:08 pm
Location: Brossard, Qc
Top

Re: MidProd 500 Single

Postby autofobe » Tue Oct 30, 2012 2:45 pm

HeyBrian,Nice project,are you really going to race next year.How about Luke,is he coming back also?

Brad
autofobe
VRRA Member
 
Posts: 579
Joined: Sun Feb 10, 2008 8:24 am
Location: peterborough
Top

Re: MidProd 500 Single

Postby BrianL » Wed Oct 31, 2012 1:15 pm

Yes and yes! We're planning on every round! Luc will still race his GS400 in P3L and I'll be in MidProd with the SR500...Cheers.
We don't stop ridding cause we get older,
We get older cause we stop ridding...
Special thanks to St-Hubert Machine Shop and Built by Bill
User avatar
BrianL
VRRA Member
 
Posts: 1063
Joined: Tue Mar 11, 2008 10:08 pm
Location: Brossard, Qc
Top

Re: MidProd 500 Single

Postby BrianL » Fri Nov 09, 2012 4:15 pm

Tore into the SR in a big way...Not pretty!!!! Seized piston or crank or both !!!!! Jumble of parts. Frame looks good, rims fine, forks OK. Time to get to work... :cry:
Last edited by BrianL on Thu Mar 06, 2014 12:17 am, edited 1 time in total.
We don't stop ridding cause we get older,
We get older cause we stop ridding...
Special thanks to St-Hubert Machine Shop and Built by Bill
User avatar
BrianL
VRRA Member
 
Posts: 1063
Joined: Tue Mar 11, 2008 10:08 pm
Location: Brossard, Qc
Top

Re: MidProd 500 Single

Postby BrianL » Fri Nov 09, 2012 4:19 pm

Nothing I have not seen before.... :roll: Have a spare engine to put in (running) just wanted to see what was happening in here... :cry:
Last edited by BrianL on Thu Mar 06, 2014 12:18 am, edited 1 time in total.
We don't stop ridding cause we get older,
We get older cause we stop ridding...
Special thanks to St-Hubert Machine Shop and Built by Bill
User avatar
BrianL
VRRA Member
 
Posts: 1063
Joined: Tue Mar 11, 2008 10:08 pm
Location: Brossard, Qc
Top

Re: MidProd 500 Single

Postby BrianL » Fri Nov 09, 2012 4:22 pm

Don't know if this puppy will ever move without drilling a million holes in her... :mrgreen:
We don't stop ridding cause we get older,
We get older cause we stop ridding...
Special thanks to St-Hubert Machine Shop and Built by Bill
User avatar
BrianL
VRRA Member
 
Posts: 1063
Joined: Tue Mar 11, 2008 10:08 pm
Location: Brossard, Qc
Top

Re: MidProd 500 Single

Postby Rick Yates » Fri Nov 09, 2012 6:40 pm

Try "Metal Rescue" in the cylinder.
User avatar
Rick Yates
VRRA Member
 
Posts: 1579
Joined: Thu Jan 30, 2003 7:42 pm
Location: Ayr, Ontario
Top

Re: MidProd 500 Single

Postby pz1morton » Fri Nov 09, 2012 8:41 pm

Or possibly try Fluid Film,it is a rust penetrant which is also a creeping fliud..have used it before with great results..

Regards Paul
69 CB350 P1
89 FZR600 P4F2 / Endurance Bike
VRRA # 757
RACE # 757

Remember this we pay to play not get payed to play
Besides it's my story and i'm stickin to it c
User avatar
pz1morton
VRRA Member
 
Posts: 933
Joined: Wed Oct 10, 2007 8:47 pm
Location: West Hill,Ontario
Top

Re: MidProd 500 Single

Postby BrianL » Sun Nov 11, 2012 2:31 pm

Sounds great ! I'll try both before drilling the crap out of the piston... :oops: Had all the trouble in the world getting the old rear Pirrelli Phantom off the rim. Should have just cut it off...It was like a petrified ring of hell...Off now and ready to clean her up. Both axles came out cleanly and no issues with front wheel. Time to order bearings for wheels and neck...I'll have a look at the swing arm this week.
We don't stop ridding cause we get older,
We get older cause we stop ridding...
Special thanks to St-Hubert Machine Shop and Built by Bill
User avatar
BrianL
VRRA Member
 
Posts: 1063
Joined: Tue Mar 11, 2008 10:08 pm
Location: Brossard, Qc
Top

Re: MidProd 500 Single

Postby BrianL » Tue Nov 20, 2012 8:07 pm

No longer have a seized piston...Release All, a sledge hammer and a 2x2...We have a clear barrel and a free moving crank... :D :D :D
Last edited by BrianL on Thu Mar 06, 2014 12:19 am, edited 1 time in total.
We don't stop ridding cause we get older,
We get older cause we stop ridding...
Special thanks to St-Hubert Machine Shop and Built by Bill
User avatar
BrianL
VRRA Member
 
Posts: 1063
Joined: Tue Mar 11, 2008 10:08 pm
Location: Brossard, Qc
Top

Re: MidProd 500 Single

Postby BrianL » Tue Nov 20, 2012 8:12 pm

Now for the real work...This is so much fun. The crank move really nicely. With the piston free, I think I'll work on the frame for a while.. :twisted:
We don't stop ridding cause we get older,
We get older cause we stop ridding...
Special thanks to St-Hubert Machine Shop and Built by Bill
User avatar
BrianL
VRRA Member
 
Posts: 1063
Joined: Tue Mar 11, 2008 10:08 pm
Location: Brossard, Qc
Top
Next
Post a reply

Return to Projects

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
© Supernova Style by Christian Bullock